|
| |
Professionally Designed, Quality Built, Price You Can Afford!
Sorry, we are temporarily out of stock!
The Super Duty Panel/Platform Mover (P-Dolly 4) was born from combining the
experience of our customers in the end use of panel movers, our expertise in
the selection of materials and the know how to build a class dolly that
surpasses any cart on the market. The result is a Panel/Platform Mover that we know
is the best-engineered product that hit the Panel Transportation Market.
Key Benefits
With
P-Dolly 4 you will gain competitive advantage by:
- Decreasing your labor cost
-
Delivering your products safely
-
Improving worker's moral and your
company's image
P-Dolly 4
will deliver all the above and pay for itself in as
little as 2 months.
- We know
the strength of the P-Dolly 4 and we are willing to back it up with a
limited lifetime warranty on the frame and the
handles. At our option we will either repair or replace any
defect in material and workmanship. Just ship the damaged component
prepaid and we will take care of the rest. This warranty is good as long
as P-Dolly 4 was used in the normal course of business. Damage
caused by misuse, abuse, or accidents will not be covered under this warranty.
Please take a moment to
read further about our new Panel/Platform Truck.
We will guaranty you this could be the best
investment you do for your business.
Key Features
Designed for the office partition installers, P-Dolly 4
comes packed with features for productivity, performance and user
comfort:
- Aviation grade aluminum frame and handles,
no rust to clean off the
handles or the frame, same yield strength as steel but third the
weight--Just 55 lbs.!--easier to carry up and down stairs and in/out of
vans--cost less to ship.
Rigid frame 2" x 3" x 1/8" Aluminum Tubing keeps the wheels aligned under
load and yields
ease in pushing the loaded Panel Mover. Other
Panel Movers that are built from 1" square tubing frame flex under load and
cause the wheels to point in
opposite directions therefore making those dollies hard to push.
Full solid deck to transport those small boxes. Now you have
2 dollies in one--a
Platform/Panel
Truck!
The platform is covered with durable non stringing indoor/outdoor carpet to
protect the cargo and the environment where the cart is used.
Removable round handles that don't pull out of the receiver whether the dolly is
being pulled or pushed. The
handles are 1.5 times stronger than the competition 1" square tubing.
Non-marring and non-slipping vinyl coated handles for ultra protection
of your cargo.
The distance between the uprights of the handles is 24" which helps
to
keep those 24" surfaces from falling
from the sides.
Handle receivers that are inside the caster-tube-support for added
strength and to pause no damage risk to your expensive cargo.
Casters are placed along the outer edge of the width of the dolly=
dolly won't tip over even if
a load is put on top of the handle.
Quiet 5" x 2" Heavy Duty non-marring polyurethane caster wheels with
ball bearings-NEVER NEED GREASING_ 1000 lbs. capacity rig and 700lbs capacity
wheel to
cruise rough terrain with confidence. Our standard P-Dolly 4
is rated for 2800 lbs load.
Flexibility in the handle height (our standard is 28" above the deck)
All wearable surfaces are easily replaceable,
don't be stuck with good
looking dolly but with rusty steel surfaces where your expensive cargo
rests!
Different sizes and options available to fit your specific needs.
Made in the USA
P-Dolly 5
Our standard P-Dolly 5 comes loaded with the same
features that P-Dolly 4 offers with the exception of:
6” x 2” heavy-duty non-marring polyurethane caster
wheels with ball bearings- NEVER NEED GREASING- 900lbs
capacity wheel. P-Dolly 5 is rated for 3600 lbs. Load.
27” x 48” Frame
No Coating on handles .
Weighs 80 lbs.
Our Partition Dollies can be customized with your choice of options and
prices to fit all budgets:
| Frame Size |
Description |
Item # |
Price |
|
27” x 30”
|
Standard 5” x 2” casters, 2 swivel, 2 rigid |
P-Dolly4/5SR |
$270 |
|
27" x 30" |
All Swivel 5” x 2” Casters |
P-Dolly4/5SS |
$280 |
|
27" x 30" |
Oversized 6” x 2” casters, 2 swivel,2 rigid
|
P-Dolly4/6SR |
$280 |
|
27" x 30" |
Oversized 6” x 2” casters, all swivel |
P-Dolly4/6SS |
$290 |
|
27" x 48" |
6” x 2” casters, 2 swivel ,
2 rigid
No coating on handles
|
P-Dolly5/6SRNC |
$390 |
|
27" x 48" |
6” x 2” casters, all swivel,
No coating on handles
|
P-Dolly5/6SSNC |
$400 |
|
27" x 48" |
6” x 2” casters, 2 swivel, 2 rigid
No coating on handles
|
P-Dolly5/6SRC |
$420 |
|
27" x 48" |
6” x 2” Casters, all swivel
No coating on handles
|
P-Dolly5/6SSC |
$430 |
Become more productive and order your P-Dolly Today!
Tel: (888) 718-9899 Ask for Jad!
We reserve the right to alter & modify technical specifications
& design without further notice!
| |
|
Quality
Contract
Manufacturing,
Inc.
